Read this page completely before operating the machine, and never leave the machine unattended while it is running.
Safety Guidelines for Use
To ensure personal safety and stable equipment operation, strictly follow the safety requirements below:
1） Do not open the enclosure door while the equipment is operating, and avoid direct exposure to laser radiation.
2） The equipment must be attended by an operator throughout the entire operation to prevent accidents.
3） Do not process materials containing polyvinyl chloride (PVC), chlorides, or other materials that may produce toxic gases.
4） Before starting the equipment, ensure that the fume extraction system is operating properly and that the working environment is well ventilated.
5） Before replacing the laser module, always disconnect the equipment from the power supply first.
6） The laser lens must be cleaned regularly (see Laser Maintenance for details) to prevent contamination from burning onto the lens and causing irreversible damage.
Materials Prohibited from Processing
To ensure personal safety and stable equipment operation, do not process the following materials:
Note
Processing Recommendations: