Flex Pro Support – Setup, Usage & Troubleshooting
Setup, touchscreen use, laser focusing, maintenance, pre-sales FAQ, and troubleshooting for the Flex Pro laser engraver.
¶ About the Flex Pro
The Flex Pro is iKier's compact enclosed laser engraver. The diode blue laser engraves a 110 mm × 110 mm area; the infrared laser engraves 105 mm × 100 mm. Materials up to 50 mm thick fit inside the enclosure. It is a Class 1 laser product (IEC 60825-1) only when installed and operated in accordance with the instructions, with the enclosure door closed and the safety interlock functioning properly.
Choose a 7 W or 12 W diode blue laser, or a 1.4 W infrared laser. The machine works with AtomStack Studio, LightBurn and the AtomStack app, and can run jobs from the touchscreen with a TF card. Class 1 models do not support a rotary attachment because the base plate is not removable.
Use original iKier laser modules only. Keep the enclosure door closed while the laser is emitting.
Who it suits: makers who want a small enclosed Class 1 machine for desktop engraving, with a built-in touchscreen for offline jobs.
¶ Common questions
¶ Getting Started
- Safe Operation
- Prohibited Materials
- Unboxing & Setup
- Panel Overview
- Computer Connection
- Mobile Connection
- Touchscreen
- Laser Replacement
- Laser Focusing
- IR Crosshair
¶ Maintenance
¶ Troubleshooting
- Power & Connection
- Touchscreen
- Laser & Quality
- Motion & Homing
- Alignment & Door
- Materials & Fumes
- Alarms & Messages