Setup, operation, maintenance, pre-sales FAQ, and troubleshooting resources for the 50W CO₂ laser cutting and engraving system.
The Master is iKier's enclosed 50W CO₂ laser cutter and engraver. The working area is 500 × 300 mm, materials up to 60 mm thick fit inside the enclosure, and with the Z1 riser and R7 conveyor feeder the working area grows to 500 × 800 mm. An optional 1.6W infrared laser module (sold separately) adds metal engraving over a 300 × 265 mm area.
The CO₂ laser cuts clear acrylic up to 12 mm thick, engraves and cuts leather, and engraves glass (glass cannot be cut). The Master has auto focus, a built-in camera for positioning, a control screen, flame detection and a door sensor that stops the job when the enclosure is opened. Jobs run from a USB drive without a computer, or from AtomStack Studio, LightBurn and the AtomStack app. With the R6 or R8 rotary attachment it engraves tumblers and bottles.
The laser tube is water-cooled: fill the tank with distilled or purified water, change it every 30 days, add antifreeze below 5°C and drain it before moving or storing the machine. The Master comes in 110V and 220V versions, so choose the one that matches your mains voltage. Connect an exhaust or the D4 purifier (75 mm hose).
Who it suits: small businesses and makers who cut clear acrylic and want an enclosed CO₂ machine with a camera.